|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good quality, no parts are missing and everthing is readable.
Thank you very much. :-)
;
This manual is all I need to check and repair my equipment. Thank you....
 ;
sorry for my english...the service given by O.M.com is perfect for content and codition...!!!
thank's a lot!!!
best greetings
;
This manual is all I need to check and repair my equipment. Thank you....
;
This manual is all I need to check and repair my equipment. Thank you....
Tray 2 paper-feed module disassembly
Remove the paper-feeder plate to gain access to the paper pickup drive assembly. It is not necessary to separate the engine module from the paper-feed module to gain access to the paper-size detection PCB, although it will provide easier access.
Figure 86.
Removing the tray 2 paper-feeder plate 1 2 3 4 5 6 7 8 9 Separate the engine module from the paper-feed module (page 171). Remove the tray from the paper-feed module. Remove the four self-tapping screws (one screw is recessed in front). Lift the paper-feeder plate to remove it. Release the two tabs on the paper-size detection PCB cover. Disconnect the three cables on the paper-size detection PCB. Press the two tabs to release the paper-size detection PCB. Note the cable routing. Slide the PCB from the paper-feeder frame. Remove the two machine screws from the paper pickup drive assembly.
EN
Chapter 6 Removing and replacing parts 179
|
|
|
> |
|
